通过认证
“尼龙加玻纤丝印油墨”参数说明
| 是否有现货： | 是 | 认证： | SGS |
| 品牌： | 欧莱斯 | 颜色： | 不限 |
| 保质期： | 48 | 粘度： | 1500 |
| 适用对象： | 尼龙、尼龙塑料、尼龙加玻纤 | 印刷方式： | 丝印、移印、网印 |
| 单件净重： | 1008 | 着色力： | 100 |
| 细度： | 1500 | 流动度≥： | 45 |
| 型号： | MPL | 规格： | 1公斤 |
| 商标： | 欧莱斯 | 包装： | 按订单 |
| 产量： | 10000 |
“尼龙加玻纤丝印油墨”详细介绍
一.油墨成分：高品质性丙烯酸树脂，进口色粉，环保溶剂及助剂
二.油墨特点：单组份溶剂型油墨，高光泽，极佳的附着力，流平性好，高遮盖力；丝印移印通用性好， 丝印不堵网，移印上下墨完全；耐酒精性能优。
三.油墨参数：
1.型号：尼龙加玻纤丝印油墨
2.粘度：26000s
3.流平度：280cm
4.细度：3u
5.着色力：100%
6.适印材质：尼龙加玻纤、尼龙塑料、尼龙塑胶、电木、聚甲醛
施工工艺
1.印前处理：用H-01专用处理水擦湿印刷部位
2.用FH-03丝印稀释剂或FH-02移印稀释剂调节油墨至适印粘度后印刷.Ingredients: high-quality ink. Acrylic resin, imported pigment, solvent and additives for environmental protection
Two. Ink features: single solvent based inks, high gloss, excellent adhesion, good leveling, high covering power and good versatility; silk screen printing, silk screen printing on the non blocking network, ink completely; alcohol resistant performance.
Three. Ink parameters:
1 type: POM ink
2 viscosity: 26000s
3 flow roughness: 280cm
4 fineness: 3U
5 coloring force: 100%
6 printing material: POM steel, bakelite, POM
construction technology
1 prepress processing: FH-01 special processing water wet wipe printing position
2 with FH-03 or FH-02 screen printing ink diluent diluent to adjust printing viscosity after printing.
二.油墨特点：单组份溶剂型油墨，高光泽，极佳的附着力，流平性好，高遮盖力；丝印移印通用性好， 丝印不堵网，移印上下墨完全；耐酒精性能优。
三.油墨参数：
1.型号：尼龙加玻纤丝印油墨
2.粘度：26000s
3.流平度：280cm
4.细度：3u
5.着色力：100%
6.适印材质：尼龙加玻纤、尼龙塑料、尼龙塑胶、电木、聚甲醛
施工工艺
1.印前处理：用H-01专用处理水擦湿印刷部位
2.用FH-03丝印稀释剂或FH-02移印稀释剂调节油墨至适印粘度后印刷.Ingredients: high-quality ink. Acrylic resin, imported pigment, solvent and additives for environmental protection
Two. Ink features: single solvent based inks, high gloss, excellent adhesion, good leveling, high covering power and good versatility; silk screen printing, silk screen printing on the non blocking network, ink completely; alcohol resistant performance.
Three. Ink parameters:
1 type: POM ink
2 viscosity: 26000s
3 flow roughness: 280cm
4 fineness: 3U
5 coloring force: 100%
6 printing material: POM steel, bakelite, POM
construction technology
1 prepress processing: FH-01 special processing water wet wipe printing position
2 with FH-03 or FH-02 screen printing ink diluent diluent to adjust printing viscosity after printing.
